Posted on Leave a comment

Teltonika RUT951

Teltonika RUT951

Teltonika RUT951 Dual-SIM 4G LTE Router

The Teltonika RUT951 has taken all of the best features of the popular RUT950, with the difference in the two units laying inside the unit, with the QualComm Chip being replaced by one from MediaTek to try and avoid any disturbances in the global supply chain caused by the chipset and semiconductor shortage seen in recent times.

Powered by RutOS and compatible with Teltonika’s Remote Management System (RMS), the RUT951 router is ideal for use in a number of professional installations. With the support of the centralised Teltonika Remote Management System you will be able to access, control and monitor all of your routers within a single platform. 

Teltonika RUT951 Key Highlights

  • Connectivity: CAT4 4G/LTE, 3G, 2G
  • WAN Failover: Automatic switch to available backup connection
  • WiFi: Wireless Access Point with Hotspot functionality
  • Dual SIM: 2 x SIM slots with auto failover, backup WAN and other switching scenarios
  • 4 x Ethernet interfaces with VLAN functionality
  • Compatible with Teltonika Remote Management System (RMS)

SPECIFICATION

Features / filters
Communication type4G/LTE, Wi-Fi,
LTE categoryCat.4 (150Mb/s Download, 50Mb/s Upload)
Maximum wireless transmission speed300 Mb/s
Number of LAN ports4x 10/100BaseTX (RJ45)
Operating frequency2.4 GHz
Wireless network standardsIEEE 802.11n
Antenna gainUnder 10dbi
IP RatingIP30
LTE bandsB1 (2100MHz), B3 (1800MHz), B7 (2600MHz), B8 (900MHz), B20 (800MHz), B28A (700 MHz), B38 (2600MHz), B40 (2300MHz), B41 (2500 MHz),
RAM memory128MB
Type of device power supplyPassive PoE, Power supply,
VariantRUT951 000000

 

Mobile network
Mobile module4G (LTE) – Cat 4 up to 150 Mbps
3G – up to 42 Mbps
2G – up to 236.8 kbps
StatusSignal Strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received
SMSSMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS,
SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreplay, SMPP
Black/white listBlack/white list of operators
Bandwidth managementBand lock, display of bandwidth status in use
APNAuto APN
Bridge modeDirect connection (bridge) between mobile ISP and device in LAN
PassthroughThe router assigns its mobile WAN IP address to another device on the LAN
Multiple PDNs (optional)Ability to use different PDNs to access multiple networks and services
Wireless networks
Wireless modeIEEE 802.11b/g/n, access point (AP), station (STA)
Wi-Fi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher, client separation
SSIDSSID stealth mode and access control based on MAC address
Wi-Fi usersUp to 100 simultaneous connections
HotspotCaptive portal (hotspot), internal/external Radius server, embedded in a configurable landing page
Ethernet
WAN1x WAN (can be configured for LAN) 10/100 Mbps,
IEEE 802.3, IEEE 802.3u compliant, supports Auto MDI/MDIX
LAN3x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards,
automatic MDI/MDIX support
Network
RoutingStatic routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS,
ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers for proper routing of VoIP packets
Call monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwarding, network traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP relayd
QoSPrioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS>25 service providers supported, others can be configured manually
Network backupVRRP, mobile, wired, Wi-Fi options, any of which can be used as a backup,
using automatic failover
Load balancingBalancing Internet traffic across multiple WAN connections
SSHFS (optional)Possibility of mounting a remote file system via SSH protocol (not available in standard software)
Security
AuthenticationShared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via Web.UI,
Unlimited firewall configuration via CLI, DMZ, NAT, NAT-T
Preventing attacksDDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention),
Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANTag-based VLAN separation
Mobile limit controlSetting custom data limits for the SIM card
WEB FilterBlack list to block unwanted websites, white list to determine allowed sites
Access controlFlexible access control for TCP, UDP, ICMP packets, MAC address filters
Secure BootCryptographic integrity check of each boot process
(available with special order code RUT950U072C0)
VPN
OpenVPNAbility to run multiple clients and servers simultaneously, 12 encryption methods
OpenVPN encryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC,
RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/server services can run simultaneously
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without changing program code
DMVPNA method for building scalable IPsec VPN networks
SSTPSSTP client instance support
ZeroTierZeroTier VPN
WireGuardWireGuard VPN client and server support
Modbus TCP Slave
ID filteringReply to one identifier in the range [1;255] or any
Allow remote accessAllow access over WAN
Custom RegistersMODBUS TCP Custom Register Block requests that read/write to a file
inside the router and can be used to extend the functionality of the MODBUS TCP Slave
Modbus TCP Master
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first);
32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus data to server
ProtocolHTTP(S), MQTT, Azure MQTT
MQTT Gateway
MQTT GatewayEnables sending commands to and receiving data from a MODBUS Master via an MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
Monitoring and management
Web.UIHTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting,
event log, system log, kernel log
FOTARemote firmware update from server, automatic notifications
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, sending/reading SMS via HTTP POST/GET
CallRestart, Status, WiFi on/off,
Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCAPI management over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS) – Teltonika Remote Management System
IoT platforms
The cloud of thingsAllows monitoring of: Device data, Mobile data, Network information, Availability
ThingWorxAllows you to monitor: WAN Type, WAN IP Mobile Operator Name,
Cellular signal strength, Cellular network type
CumulocityAllows you to monitor: Device model, revision and serial number,
Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP
Azure IoT HubCan send device IP, number of bytes sent/received/ 3G connection status, network link status,
IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal,
WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number,
connection type, temperature, Azure IoT Hub server PIN number
System parameters
CPUMediatek MIPS 24Kc 580 MHz
RAM128 MB, DDR2
Flash Memory16 MB, SPI Flash
Software/Configuration
Web.UIUpdate software from file, check software on server,
configuration profiles, configuration backup, restore point
FOTASoftware/configuration update from server
RMSSoftware/configuration update for multiple devices
Save settingsSoftware update without losing current configuration
Operating SystemRutOS (OpenWrt operating system based on Linux)
Supported languagesBusybox shell, Lua, C
Development ToolsSDK with included graphical environment
Inputs/Outputs
Inputs1 x digital input,
0-5 V detected as logic low,
8-30 V detected as logic high
Outputs1 x digital open collector output, max. output voltage 30 V, 300 mA
Event handlingSMS, EMAIL, RMS
Power supply
Connector4-pin industrial DC power connector
Input voltage range9 – 30 VDC (4-pole industrial socket),
reverse polarity protection, surge protection >33 V DC 10 us max.
PoE (passive)Passive PoE over spare pairs (available from hardware version 0007 and batch number 0010)
Power over LAN port, incompatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption< 2 W in idle mode,
< 7 W max.
Physical interfaces (ports, LED, antennas, buttons, SIM)
Ethernet4x RJ-45, 10/100 Mbps
I/O1 x digital input, 1 x digital output on 4-pin power connector
LEDs1 bi-color connection status LED
5 connection strength LEDs
4 LAN status LEDs
1 power LED
SIM2 x SIM Slots (Mini SIM – 2FF), 1.8 V/3 V
External SIM tray
Power supply4-pin industrial DC power connector
Antennas2x SMA for LTE, 2x RP-SMA for Wi-Fi antenna
ResetButtons for restarting/restoring factory settings
Physical characteristics
Housing materialAluminium housing, plastic panels
Dimensions110 x 50 x 100 mm
Weight287g
Mounting optionsDIN rail (can be mounted on two sides), placement on flat surface
Work environment
Ambient temperature range during operationFrom -40°C to 75°C
Ambient humidity during operation10% to 90%, non-condensing
Protection classIP30
Certificates
RegulationsCE/RED, UKCA, CB
EMI Immunity
StandardsEN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Final draft EN 301 489-52 V1.2.0,
EN 55032:2015 A1:2020, EN 55035:2017 A11:2020, EN 61000-3-3:2013 A1:2019, EN IEC 61000-3-2:2019
ESDEN 61000-4-2:2009
Radiation resistanceEN 61000-4-3:2020
EFTEN 61000-4-4:2012
Surge immunity (AC power port)EN 61000-4-5:2014 A1:2017
Resistance to conductionEN 61000-4-6:2014
DIPEN IEC 61000-4-11:2020
RF
StandardsEN 300 328 V2.2.2, EN 301 908-1 V13.1.1,
EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1
Security
StandardsEN IEC 62311:2020 IEC 62368-1:2018 EN IEC 62368-1:2020 A11:2020

BUY THE TELTONIKA RUT951 – CLICK HERE

Posted on Leave a comment

RUTX50 5G Router

RUTX50

Teltonika RUTX50 is the new high speed, 5G industrial router providing the ideal solution for M2M / IoT connectivity applications that need high speed connectivity.

Utilising the high speed 5G connectivity quickly being rolled out across the UK, the Teltonika RUTX50 builds upon the success of the Teltonika Industrial 4G router range, including the popular RUT950, RUT955, RUT240, RUTX12 and RUTX14.

The RUTX50 router uses the tried and tested RUTX architecture with a new embedded 5G modem to deliver lightning fast 5G connectivity. Combined with the Teltonika RUTOS and RMS (Remote Management System) the RUTX50 is due to cause a stir in the crowded Industrial 5G router marketplace.

The RUTX50 price is expected to be around £695 retail with trade pricing at around £645.00.

Teltonika have announced the launch of their 5G router and 5G Gateway (TRB500) via a youtube live video launch in September where they will unveil the full RUTX50 specification and features, along with pricing and availability.

Posted on Leave a comment

Teltonika RUTX14 LTE CAT12 4G Router

RUTX14 in the new high speed, LTE CAT12 4G Router from Teltonika and uses an embedded LTE CAT12 4G modem to provide high speed 4G Internet connectivity for your M2M, remote monitoring and management application.

RUTX14

The Teltonika RUTX14 CAT12 LTE Router is a high speed, industrial grade 4G router that has an embedded, high speed LTE CAT12 4G modem enabling the user to insert their 4G SIM Card and benefit from high speed 4G mobile broadband Internet connectivity. This high speed 4G router is capable of providing 4G download speeds up to 600Mbps and upload speeds up to 100Mbps. This means that the Teltonika RUTX14 router is a great choice for any M2M application that could benefit from a high speed 4G connection, maybe using the RUTX14 to provide 4G CCTV Internet connectivity in conjunction with a Fixed IP SIM Card.

The RUTx14 4G Router will be available in August/Spetember 2021.

What is CAT12 LTE 4G?

Posted on

RUT950 / RUT955 Compatibility with EE

Some customers have experienced an issue with connecting to the 4G network when using an EE SIM Card directly from EE. Teltonika have already provided a fix for this so if you are experiencing an issue connecting to EE 4G network with EE SIM then you can download the firmware and update your router

here is the link

https://www.westlake.co.uk/Teltonika/RUT9XX_T_DEV_00.06.02.92_WEBUI.bin

Once you update the firmware then there will be no issue – Solved!

Posted on Leave a comment

4G Router Store

Buy the latest 4G Routers, 4G Antennas, 4G Signal Testers and accessories from the new 4G Router Store.

www.4grouter.co.uk

Best Selling routers including:-

  • Proroute H685 4G Router
  • Proroute H820 4G Router
  • Proroute H820Q CAT6 LTE High Speed 4G Router with 802.11AC WiFi
  • Proroute H900 CAT6 LTE High Speed 4G Router with 802.11AC Dual Band WiFi, RS232, Digital IO
  • Amit IDG761 Dual SIM 4G Router
  • Amit IDG500 Compact Dual SIM 4G Router
  • Amit VHG760 Compact Vehicle 4G Router

Best Selling 4G Antennas including:-

  • Fullband MIMORAD Outdoor MIMO 4G Antenna
  • Fullband MIMORAD Plus extra high gain outdoor MIMO 4G Antenna
  • Fullband GXS606 Outdoor Antenna
  • Fullband FB4GDOME – Heavy Duty MIMO Dome Antenna
  • Sirio HGO-4G Outdoor antenna

Also – get great deals on Fixed IP SIM Cards with a public IP address making your 4G router installation for remote access quick and simple – just like using a normal wired broadband router but with the convenience of 4G wireless broadband.

Posted on 1 Comment

Teltonika RUT240 Compact 4G Router

As well as the RUT230 3G Router, Teltonika will also manufacture the RUT240 4G Router – it will have all the same features as the RUT230 but with a 4G Modem inside to provider higher download and uupload speeds using 4G mobile broadband Internet connectivity.

RUT240

The only difference between the RUT230 and RUT240 apart from the embedded 4G modem is the number of antennas.  The RUt240 4G Router has 2 x Cellular Antenna ports for optimum performance for 4G networks.  Just like the 3G version, these 4G antennas are removable and can be replaced with alternative 4G antennas.

Teltonika RUT240

Posted on 1 Comment

RUT230 3G Router announced by Teltonika

Teltonika announced the launch of the RUT230 3G Router which will replace the RUT500 and RUT900 3G Routers.  It will be available to order in June or July 2017 with an estimated price of £99.00.

rut230 3g router

It is a low cost 3G router with 2 x Ethernet ports.  So if you need a low cost alternative to the RUT950 4G router that will provide basic 3G connectivity with a single SIM card Slot, WiFi and 2 x Ethernet ports then the Teltonika RUT230 3G Router will be a possible solution for your project.

  • TECHNOLOGY

  • 3G – Up to 14.4 Mbps i
  • 2G – Up to 236.8 Kbps i
  • WiFi – Up to 150 Mbps i
  • Ethernet – 2 ports i
  • SMS i
  • HARDWARE

  • Digital output – 1
  • DIN – digital input – 1
  • 1x LAN 10/100Mbps Ethernet port
  • 1x WAN 10/100Mbps Ethernet ports
  • IEEE 802.11b/g/n WiFi standards
  • Durable aluminum housing
  • Power over Ethernet (not compliant with IEEE 802.3af – 2003)
  • Mobile antenna type – 1 x SMA for 3G
  • WiFi antenna type – 1 x RP-SMA
  • Input voltage range – 9 – 30 VDC
  • Operating temperature range – -40 °C to 75 °C
  • Storage temperature range – -45 °C to 80 °C
  • Power consumption – < 5W
  • Mounting options – DIN Rail, Wall
  • LED indication – 2x connection status, 5x connection strength, 1x Power
  • FIRMWARE

  • Bridge mode
  • Static routes
  • NTP
  • Wireless Hotspot
  • Wireless Client
  • Wireless AP
  • Ping reboot
  • Periodic reboot
  • Real-time graphs
  • Backup WAN
  • Mobile Traffic counter
  • Connection status overview bar
  • Configuration backup/restore
  • IPsec
  • GRE Tunnel
  • OpenVPN
  • PPTP
  • L2TP
  • SNMP
  • SNMP Trap
  • Send/receive SMS
  • Status via SMS
  • SMS reboot
  • Mobile enable/disable via SMS
  • Wireless enable/disable via SMS
  • OpenVPN enable/disable via SMS
  • Web Filter
  • Mobile Data Limit
  • Configuration Profiles
  • Event logging
  • Call Utilities
  • Disable Roaming
  • Access control safety
  • VLAN
  • CLI
  • Firewall
  • IP/MAC filter
  • DHCP server
  • Dynamic DNS
  • RMS support

 

Teltonika will also make a 4G version of the RUT230 3G router, it will be called the RUT240 4G Router.

Posted on 3 Comments

Teltonika announce hardware updates for RUT950 – power connector and Telit 4G modem

Teltonika have announced today that the Teltonika RUT950 will be produced with a new terminal power connection.

RUT950 4G Router new power connection and telit 4G modem

 

RUT950 UK mains Power Adapter supplied with all new units from Jan 2017

 

Teltonika claim the benefits of the new style power connector for the RUT950 4G Router will be

1) Socket plug with fixation
2) Ready for RCM certification
3) One socket for industrial and home usage
4) Reserved pins for ignition (future option)

Teltonika also announced that they will be replacing the existing Huawei 4G Modem and replace it with a new CAT4 Telit 4G Modem.

The new Telit Module has the following features

  • LTE (DL/UK) – 150 / 50 Mbps
  • LTE Bands – B1 (2100Mhz) / B3 (1800Mhz) / B7 (2600Mhz)  / B8 (900Mhz) / B20 (800Mhz)
  • HSPA (HSDPA) – 21 Mbps
  • HSPA (HSUPA) 5.76 Mbps
  • UMTS – 384 Mbps
  • GSM / GPRS / EDGE – Dual band Europe (900 / 1800 Mhz)
  • UMTS / HSDPA / HSUPA – B1 / B8 (2100 / 900 Mhz)
  • EDGE – 236.8 Kbps
  • GPRS – 85.6 Kbps

Compared to the old Huawei Module

  • LTE (DL/UK) – 100 / 50 Mbps
  • LTE Bands – B1 / B2 / B3 / B5 / B7 / B8 / B20
  • HSPA (HSDPA) – 21 Mbps
  • HSPA (HSUPA) 5.76 Mbps
  • UMTS – 384 Mbps
  • GSM / GPRS / EDGE – Quad Band)
  • UMTS / HSDPA / HSUPA – B1 / B2 / B5 / B8
  • EDGE – 236.8 Kbps
  • GPRS – 85.6 Kbps

So for 4G connectivity the main benefit is the move to a CAT4 module to hopefully provide better download speeds – of course your maximum download and upload speeds for the RUT950 4G Router will depend upon distance to 4G base Station and the number of simultaneous users and the mobile networks bandwidth and service restrictions.

Once Teltonika start production of the revised RUT950 4G Router then the old barrel style connector will no longer be available.  replacement power supplies will need to be specially ordered and are expected to be more expensive than the normal mains power supplies.

 

If you have the new version of the Teltonika RUT950 and are having 3G/4G connection issues then please ensure you are using the latest firmware and have correctly configured the mobile settings page – click here for details