Posted on Leave a comment

RUTX50 5G Router

RUTX50

Teltonika RUTX50 is the new high speed, 5G industrial router providing the ideal solution for M2M / IoT connectivity applications that need high speed connectivity.

Utilising the high speed 5G connectivity quickly being rolled out across the UK, the Teltonika RUTX50 builds upon the success of the Teltonika Industrial 4G router range, including the popular RUT950, RUT955, RUT240, RUTX12 and RUTX14.

The RUTX50 router uses the tried and tested RUTX architecture with a new embedded 5G modem to deliver lightning fast 5G connectivity. Combined with the Teltonika RUTOS and RMS (Remote Management System) the RUTX50 is due to cause a stir in the crowded Industrial 5G router marketplace.

The RUTX50 price is expected to be around £695 retail with trade pricing at around £645.00.

Teltonika have announced the launch of their 5G router and 5G Gateway (TRB500) via a youtube live video launch in September where they will unveil the full RUTX50 specification and features, along with pricing and availability.

Posted on Leave a comment

Unlimited Data Fixed IP SIM Cards

Unlimited Fixed IP SIM

When using a Teltonika router for remote access and monitoring when using large amounts of data you can now buy a Fixed IP SIM card with large amounts of data. These Fixed IP SIM cards are advertised as Unlimited Fixed IP SIM’s but like most things broadband related they come with a fair use policy which is usually between 500GB-650GB per month.

This means that if you are remotely connecting to a CCTV IP Camera / CCTV NVR using a 4G mobile broadband service and are fed up of large bills every month when you use more than your 20GB or 50GB inclusive data allowance normally used by CCTV installers and users then an unlimited data fixed IP SIM card can be the best solution for you. Costing just a little bit more than a normal 20GB Fixed IP SIM you can now fix your monthly remote access costs without the worry of overspending.

These mobile broadband data SIM cards are available on several different networks and come with a fixed, public IP address. This means that you can directly connect to your Teltonika router and use port forwarding to connect to the devices on the LAN.

These SIM Cards work on 4G and 5G where available and of course the type of router you install it into. At the time of writing this Teltonika routers are only available with embedded 4G modems, but when you are able to purchase a Teltonika 5G router in the future these SIM cards will work with your new 5G router.

Posted on Leave a comment

Teltonika TCR100 4G Router

TCR100

TCR100 from Teltonika is a high speed 4G Router for the home.  Providing high speed LTE 4G Internet connectivity using the embedded high speed 4G+ (LTE-A) – Cat 6 modem providing up to 300 Mbps download speeds on 4G and up to 42Mbps on 3G.

The Teltonika TCR100 is a sleek consumer oriented Mobile router equipped with 802.11ac WiFi, intuitive RUTOS interface and its security features.

TCR100

4G WI-FI ROUTER FOR HOME USER

4G LTE-ADVANCED

LTE CAT6 enables cellular speeds up to 300Mbps with carrier aggregation

WI-FI

Dual-Band with 2.4 GHz & 5.0 GHz frequencies

DURABLE

Rugged housing with heatsink for thermal efficiency

SECURE

Firewall and numerous VPN services including OpenVPN, IPsec, PPTP, L2TP & DMVPN

RMS

Compatible with our RMS enabling remote access and on-demand VPN services

RUTOS

Powerful OS with intuitive UI based on OpenWrt empowers endless configuration possibilities.MEET THE TCR100

This router represents our extensive industrial IoT experience brought straight to your home.

With 4G LTE-A technology you can use TCR100 as a primary or a backup connectivity source.

Two Ethernet interfaces and Dual-band Wi-Fi allow to connect multiple devices with ease!

TCR100 features connectivity indicators, Wi-Fi, and Wi-Fi Protected buttons for quick and simple setup.

Reliable, secure and easy to use – TCR100 is the perfect choice for any home network.

TCR100 SPECIFICATION

MOBILE
Mobile module 4G+ (LTE-A) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list Operator black/white list
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
APN Auto APN
Bridge mode Direct connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode 2.4 GHz (802.11 b/g/n, 2×2 MIMO), 5 GHz (802.11 ac, 1×1 MIMO), Access Point (AP), Station (STA)
WiFi security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID ESSID stealth mode
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden
Wireless mesh/roaming Wireless mesh (802.11s), fast roaming (802.11r)
ETHERNET
WAN 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
LAN 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
NETWORK
Routing Static routes, Dynamic routes
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forwards, traffic rules, NAT rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS Possibility to mount remote file system via SSH protocol
SECURITY
Authetication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Tag based VLAN separation
Mobile quota control Custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPSec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 support
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs
SSTP SSTP client instance support
ZeroTier ZeroTier VPN client support
WireGuard WireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filtering Respond to one ID in range [1;255] or any
Allow remote access Allow access through WAN
Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP MASTER
Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
Gateway Allows sending commands and receiving data from MODBUS Master trough MQTT broker
DNP3
Supported modes TCP Master, DNP3 Outstation
DATA TO SERVER
Protocols HTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call Reboot, Status, Mobile data on/off, Output on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)
IoT PLATFORMS
Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPU QCA9531, MIPS 24kc, 650 MHz
RAM 128 MB, DDR2
FLASH storage 16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices at once
Keep settings Update FW without losing current configuration
POWER
Connector 4 pin industrial DC power socket
Input voltage range 9 – 30 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption 3.7 W average, 9.3 W max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet 2 x RJ45 ports, 10/100 Mbps
Status LEDs 1 x Internet, 1 x WiFi, 3 x Mobile connection strength, 2 x Ethernet status
SIM 1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder (Embedded SIM variant available)
Antenna 2 x SMA for LTE, 2 x Internal for 2.4 GHz WiFi, 1 x Internal for 5 GHz WiFi
Power 1 x 4 pin DC connector
WPS WPS activation button
WiFi On/Off WiFi enable/disable button
Reset Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material Plastic housing with aluminum screws and heatsink
Dimensions (W x H x D) 150 x 37 x 105 mm
Weight 376 g
Mounting options Flat surface placement
OPERATING ENVIRONMENT
Operating temperature -40 C to 75 C
Operating humidity 10 % to 90 % non-condensing

The Teltonika TCR100 is a great value, industrial style 4G router designed for home or small business users that want an LTE 4G router with some of the advanced features available on industrial / M2M 4G routers such as the RUT950 / RUT955.

The Teltonika TCR100 4G Router is relatively easy to configure.  You can see in the following video how to configure the APN settings, port forwarding, ping reboot, change the LAN IP address as also change the WiFi SSID and password.  If you need to remotely access the TCR100 router then you will need a Fixed IP SIM Card.  There are now unlimited data fixed IP SIM cards available.

You can view other support videos for the Teltonika TCR100 at the dedicated TCR product site www.tcr100.com 

 

Posted on Leave a comment

Teltonika RUTX14 LTE CAT12 4G Router

RUTX14 in the new high speed, LTE CAT12 4G Router from Teltonika and uses an embedded LTE CAT12 4G modem to provide high speed 4G Internet connectivity for your M2M, remote monitoring and management application.

RUTX14

The Teltonika RUTX14 CAT12 LTE Router is a high speed, industrial grade 4G router that has an embedded, high speed LTE CAT12 4G modem enabling the user to insert their 4G SIM Card and benefit from high speed 4G mobile broadband Internet connectivity. This high speed 4G router is capable of providing 4G download speeds up to 600Mbps and upload speeds up to 100Mbps. This means that the Teltonika RUTX14 router is a great choice for any M2M application that could benefit from a high speed 4G connection, maybe using the RUTX14 to provide 4G CCTV Internet connectivity in conjunction with a Fixed IP SIM Card.

The RUTx14 4G Router will be available in August/Spetember 2021.

What is CAT12 LTE 4G?

Posted on Leave a comment

Teltonika 5G Router

We get many questions recently about when Teltonika with launch their new 5G Router.

The quick answer is that there is no information from Teltonika about a 5G router but we can speculate whether they will just add a 5G modem inside existing M2M routers and perhaps make a RUT950 5G Router or RUT955 5G Router version. It might be the case when considering the launch of a new Teltonika 5G Router that they decide to use their office based routers like the RUTX11, RUTX12 and use these as the base for the new 5G devices or whether they will manufacture a brand new hardware platform for their new 5G router.

Posted on

RUT950 / RUT955 Compatibility with EE

Some customers have experienced an issue with connecting to the 4G network when using an EE SIM Card directly from EE. Teltonika have already provided a fix for this so if you are experiencing an issue connecting to EE 4G network with EE SIM then you can download the firmware and update your router

here is the link

https://www.westlake.co.uk/Teltonika/RUT9XX_T_DEV_00.06.02.92_WEBUI.bin

Once you update the firmware then there will be no issue – Solved!

Posted on Leave a comment

4G Router Store

Buy the latest 4G Routers, 4G Antennas, 4G Signal Testers and accessories from the new 4G Router Store.

www.4grouter.co.uk

Best Selling routers including:-

  • Proroute H685 4G Router
  • Proroute H820 4G Router
  • Proroute H820Q CAT6 LTE High Speed 4G Router with 802.11AC WiFi
  • Proroute H900 CAT6 LTE High Speed 4G Router with 802.11AC Dual Band WiFi, RS232, Digital IO
  • Amit IDG761 Dual SIM 4G Router
  • Amit IDG500 Compact Dual SIM 4G Router
  • Amit VHG760 Compact Vehicle 4G Router

Best Selling 4G Antennas including:-

  • Fullband MIMORAD Outdoor MIMO 4G Antenna
  • Fullband MIMORAD Plus extra high gain outdoor MIMO 4G Antenna
  • Fullband GXS606 Outdoor Antenna
  • Fullband FB4GDOME – Heavy Duty MIMO Dome Antenna
  • Sirio HGO-4G Outdoor antenna

Also – get great deals on Fixed IP SIM Cards with a public IP address making your 4G router installation for remote access quick and simple – just like using a normal wired broadband router but with the convenience of 4G wireless broadband.

Posted on 1 Comment

Teltonika RUT240 Compact 4G Router

As well as the RUT230 3G Router, Teltonika will also manufacture the RUT240 4G Router – it will have all the same features as the RUT230 but with a 4G Modem inside to provider higher download and uupload speeds using 4G mobile broadband Internet connectivity.

RUT240

The only difference between the RUT230 and RUT240 apart from the embedded 4G modem is the number of antennas.  The RUt240 4G Router has 2 x Cellular Antenna ports for optimum performance for 4G networks.  Just like the 3G version, these 4G antennas are removable and can be replaced with alternative 4G antennas.

Teltonika RUT240