Teltonika have announced the launch of the RUT906 4G router which will replace the RUT956 / RUT955 and just like the RUT901 and RUT200 this new product offers the end the same build quality and feature set, but with a lower price point.
RUT906 is E-MARK Certified 4G ROUTER
E-mark cellular 4G router for industrial IoT applications, supporting serial interfaces RS232 and RS485, MQTT, BACnet, I/Os, Ethernet, and more. This cellular router is equipped with GNSS and failsafe features such as Dual SIM, auto-failover, and backup WAN.
| Category | Feature | Description |
|---|---|---|
| MOBILE | Mobile module | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection | |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID | |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP | |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages | |
| Black/White list | Operator black/white list | |
| Band management | Band lock, Used band status display | |
| APN | Auto APN | |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN | |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN | |
| WIRELESS | Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| WiFi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation | |
| SSID/ESSID | ESSID stealth mode | |
| WiFi users | Up to 100 simultaneous connections | |
| Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes | |
| Wireless Connectivity Features | Fast roaming (802.11r), Relayd | |
| ETHERNET | WAN | 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| LAN | 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX | |
| NETWORK | Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) | |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets | |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection | |
| Firewall | Port forward, traffic rules, custom rules | |
| DHCP | Static and dynamic IP allocation, DHCP Relay | |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e | |
| DDNS | Supported >25 service providers, others can be configured manually | |
| Network backup | WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover | |
| Load balancing | Balance Internet traffic over multiple WAN connections | |
| SSHFS | Possibility to mount remote file system via SSH protocol | |
| SECURITY | Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T | |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) | |
| VLAN | Port and tag-based VLAN separation | |
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number | |
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only | |
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter | |
| VPN | OpenVPN | Multiple clients and a server can run simultaneously, 27 encryption methods |
| OpenVPN Encryption | DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 | |
| IPsec | IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) | |
| GRE | GRE tunnel, GRE tunnel over IPsec support | |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support | |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code | |
| DMVPN | Method of building scalable IPsec VPNs | |
| SSTP | SSTP client instance support | |
| ZeroTier | RUT906 supports ZeroTier VPN client support | |
| WireGuard | WireGuard VPN client and server support | |
| Tinc | Tinc offers encryption, authentication and compression in its tunnels. Client and server support | |
| BACNET | Supported connection types | RS485, TCP |
| Supported modes | Router | |
| OPC UA | Supported modes | Client, Server (planned) |
| Supported connection types | TCP | |
| DNP3 | Supported modes | TCP Station, Outstation |
| Supported connection types | RS232, RS485, TCP, USB | |
| MODBUS | Supported modes | Server, Client |
| Supported connection types | RS232, RS485, TCP, USB | |
| Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality | |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII | |
| DATA TO SERVER | Protocol | HTTP(S), MQTT, Azure MQTT, Kinesis |
| MODBUS MQTT GATEWAY | Modbus MQTT Gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
| MONITORING & MANAGEMENT | WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA | Firmware update from server, automatic notification | |
| SSH | SSH (v1, v2) | |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET | |
| Call | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off | |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem | |
| MQTT | MQTT Broker, MQTT publisher | |
| SNMP | SNMP (v1, v2, v3), SNMP Trap | |
| JSON-RPC | Management API over HTTP/HTTPS | |
| MODBUS | MODBUS TCP status/control | |
| RMS | Teltonika Remote Management System (RMS) | |
| IOT PLATFORMS | Cloud of Things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
| ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type | |
| Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength | |
| Azure IoT Hub | Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type | |
| SYSTEM CHARACTERISTICS | CPU | Mediatek, 580 MHz, MIPS 24Kc |
| RAM | 128 MB, DDR2 | |
| FLASH storage | 16 MB, SPI Flash | |
| FIRMWARE / CONFIGURATION | WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| FOTA | Update FW | |
| RMS | Update FW/configuration for multiple devices at once | |
| Keep settings | Update FW without losing current configuration | |
| FIRMWARE CUSTOMIZATION | Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++, and Python, Java in Package manager | |
| Development tools | SDK package with build environment provided | |
| LOCATION TRACKING | GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS | |
| NMEA | NMEA 0183 | |
| NTRIP | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) | |
| Server software | Supported server software TAVL, RMS | |
| Geofencing | Configurable multiple geofence zones | |
| SERIAL | RS232 | DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate |
| RS485 | RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate | |
| Serial functions | Console, Serial over IP, Modem | |
| USB | Data rate | USB 2.0 |
| Applications | Samba share, USB-to-serial | |
| External devices | Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter | |
| Storage formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 | |
| INPUT / OUTPUT | Input | 1 x digital dry input (0 – 3 V), 1 x digital galvanically isolated input (0 – 30 V), 1 x analog input (0 – 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high) |
| Output | 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector) | |
| Events | Email, RMS, SMS | |
| I/O juggler | Allows to set certain I/O conditions to initiate event | |
| POWER | Connector | 4-pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max | |
| PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 30 VDC | |
| Power consumption | < 2 W idle, < 7 W Max | |
| PHYSICAL INTERFACES | Ethernet | 4 x RJ45 ports, 10/100 Mbps |
| I/O’s | 2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector | |
| Status LEDs | 1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power | |
| SIM | 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) | |
| Power | 1 x 4-pin power connector | |
| Input/output | 1 x 10-pin industrial socket for inputs/outputs | |
| Antennas | 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS | |
| USB | 1 x USB A port for external devices | |
| RS232 | 1 x DB9 socket | |
| RS485 | 1 x 6-pin industrial socket | |
| Reset | Reboot/User default reset/Factory reset button | |
| PHYSICAL SPECIFICATION | Casing material | Aluminium housing, plastic panels |
| Dimensions (W x H x D) | 109.5 x 50 x 100 mm | |
| Weight | 295 g | |
| Mounting options | DIN rail (can be mounted on two sides), flat surface placement | |
| OPERATING ENVIRONMENT | Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing | |
| Ingress Protection Rating | IP30 | |
| REGULATORY & TYPE APPROVALS | Regulatory | CE, UKCA, RCM, CB |
| EMI IMMUNITY | Standards | EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-19 V2.2.0, EN 301 489-52 V1.2.1 |
| ESD | EN 61000-4-2:2009 | |
| EFT | EN 61000-4-4:2012 | |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014+A1:2017 | |
| CS | EN 61000-4-6:2014 | |
| DIP | EN IEC 61000-4-11:2020 | |
| Radiated Immunity | EN IEC 61000-4-3:2020 | |
| CE | EN 62311 | |
| CB | IEC 62368-1:2018 | |
| RF | Standards | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 300 328 |
RUT906 PACKAGE CONTAINS
- Router RUT906
- 9 W PSU
- 2 x LTE antennas (swivel, SMA male)
- 2 x Wi-Fi antennas (swivel, SMA male)
- GNSS antenna (adhesive, SMA male, 3 m cable)
- RS485 connector block
- I/O connector block
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- Packaging box