Teltonika RUT901 industrial router
Teltonika RUT901 leverages the best features of its predecessors – Teltonika Networks’ industrial routers RUT950 and RUT951.
TeltonikaRUT901 is a professional industrial 4G LTE router with Wi-Fi connectivity for IoT applications. It operates over Wi-Fi in the 2.4 GHz band and IEEE 802.11b/g/n standards. It has 4 Ethernet ports. The LTE modem offers up to 100 Mbps downlink and up to 50 Mbps uplink. The device is rugged, protected by an aluminum housing. The LTE router features high performance for mobile communications in a wide temperature range and harsh operating conditions.
4G LTE wireless network, Wi-Fi and dual SIM
The device is equipped with dual SIM 4G cellular connectivity , Wi-Fi and 4 Ethernet interfaces to meet the needs of the most diverse IoT solutions.
Multiple automation scenarios and high level of security
The RUT901 is powered by RutOS, which offers customization options for professional applications, automation features and the highest level of security for your solutions. Compatibility with Teltonika Networks ‘ Remote Management System (RMS) enables secure remote management, saving time and expense.
4G Backup connection
Automatic WAN switching to an available backup connection ensures network continuity and eliminates downtime.
The standard set includes
- 9 W power supply
- Router RUT901
- 2 x LTE antennas (SMA male)
- 2 x WiFi antennas (RP-SMA male)
- Ethernet cable (1.5 m)
- SIM adapter
- Quick reference guide
- RMS flyer
- Packaging
RUT901
SPECIFICATION
| Mobile network | |
| Mobile module | 4G (LTE) – Cat 4 up to 150 Mbps 3G – up to 42 Mbps 2G – up to 236.8 kbps |
| SIM switch | 2 SIM cards, automatic switching cases: weak signal, data limit, SMS limit, roaming, no network, network denial, data connection failure, SIM card idle protection |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received, connected bandwidth, IMSI, ICCID |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreplay, SMPP |
| Black/white list | Black/white list of operators |
| Bandwidth management | Band lock, display of bandwidth status in use |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between mobile ISP and device in LAN |
| Passthrough | The router assigns its mobile WAN IP address to another device on the LAN |
| Wireless networks | |
| Wireless mode | IEEE 802.11b/g/n, access point (AP), station (STA) |
| Wi-Fi security | WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| SSID | SSID stealth mode and access control based on MAC address |
| Wi-Fi users | Up to 100 simultaneous connections |
| Hotspot | Captive portal (hotspot), internal/external Radius server, embedded in a configurable landing page |
| Ethernet | |
| WAN | 1x WAN (can be configured for LAN) 10/100 Mbps, IEEE 802.3, IEEE 802.3u compliant, supports Auto MDI/MDIX |
| LAN | 3x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, automatic MDI/MDIX support |
| Network | |
| Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP) |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL) |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers for proper routing of VoIP packets |
| Call monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forwarding, network traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP relayd |
| QoS | Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | >25 service providers supported, others can be configured manually |
| Network backup | VRRP, mobile, wired, Wi-Fi options, any of which can be used as a backup, using automatic failover |
| Load balancing | Balancing Internet traffic across multiple WAN connections |
| SSHFS (optional) | Possibility of mounting a remote file system via SSH protocol (not available in standard software) |
| Security | |
| Authentication | Shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via Web.UI, Unlimited firewall configuration via CLI, DMZ, NAT, NAT-T |
| Preventing attacks | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Tag-based VLAN separation |
| Mobile limit control | Setting custom data limits for the SIM card |
| WEB Filter | Black list to block unwanted websites, white list to determine allowed sites |
| Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
| VPN | |
| OpenVPN | Ability to run multiple clients and servers simultaneously, 12 encryption methods |
| OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPsec | IKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| GRE | GRE tunnel |
| PPTP, L2TP | Client/server services can run simultaneously |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code |
| DMVPN | A method for building scalable IPsec VPN networks |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN |
| WireGuard | WireGuard VPN client and server support |
| Modbus TCP Slave | |
| ID range | Reply to one identifier in the range [1;255] or any one |
| Allow remote access | Allow access over WAN |
| Custom Registers | MODBUS TCP Custom Register Block requests that read/write to a file inside the router and can be used to extend the functionality of the MODBUS TCP Slave |
| Modbus TCP Master | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| Modbus data to server | |
| Protocol | HTTP(S), MQTT, Azure MQTT |
| MQTT Gateway | |
| MQTT Gateway | Enables sending commands to and receiving data from a MODBUS Master via an MQTT broker |
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation |
| Monitoring and management | |
| Web.UI | HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log |
| FOTA | Remote firmware update from server, automatic notifications |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
| Call | Restart, Status, WiFi on/off, Mobile data on/off, Output on/off |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | API management over HTTP/HTTPS |
| MODBUS | MODBUS TCP status/control |
| RMS | Teltonika Remote Management System (RMS) – Teltonika Remote Management System |
| IoT platforms | |
| The cloud of things | Allows monitoring of: Device data, Mobile data, Network information, Availability |
| ThingWorx | Allows you to monitor: WAN Type, WAN IP Mobile Operator Name, Cellular signal strength, Cellular network type |
| Cumulocity | Allows you to monitor: Device model, revision and serial number, Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP |
| Azure IoT Hub | Can send device IP, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type, temperature, Azure IoT Hub server PIN number |
| System parameters | |
| CPU | Mediatek MIPS 24KEc 580 MHz |
| RAM | 128 MB, DDR2 |
| Flash Memory | 16 MB, SPI Flash |
| Software/Configuration | |
| Web.UI | Update software from file, check software on server, configuration profiles, configuration backup, restore point |
| FOTA | Software/configuration update from server |
| RMS | Software/configuration update for multiple devices |
| Save settings | Software update without losing current configuration |
| Operating System | RutOS (OpenWrt operating system based on Linux) |
| Supported languages | Busybox shell, Lua, C |
| Development Tools | SDK with included graphical environment |
| Inputs/Outputs | |
| Inputs | 1 x digital input, 0-5 V detected as logic low, 8-30 V detected as logic high |
| Outputs | 1 x digital open collector output, max. output voltage 30 V, 300 mA |
| Event handling | SMS |
| I/O juggler | Allows you to set specific I/O conditions to initiate an event |
| Power supply | |
| Connector | 4-pin industrial DC power connector |
| Input voltage range | 9 – 30 VDC (4-pole industrial socket), reverse polarity protection, surge protection >33 V DC 10 us max. |
| PoE (passive) | Passive PoE over spare pairs (available from hardware version 0007 and batch number 0010) Power over LAN port, incompatible with IEEE802.3af, 802.3at and 802.3bt |
| Power consumption | < 2 W in idle mode, < 7 W max. |
| Physical interfaces (ports, LED, antennas, buttons, SIM) | |
| Ethernet | 4x RJ-45, 10/100 Mbps |
| I/O | 1 x digital input, 1 x digital output on 4-pin power connector |
| LEDs | 1 bi-color connection status LED 5 connection strength LEDs 4 LAN status LEDs 1 power LED |
| SIM | 2 x SIM Slots (Mini SIM – 2FF), 1.8 V/3 V External SIM tray eSIM (optional) |
| Power supply | 4-pin industrial DC power connector |
| Antennas | 2x SMA for LTE, 2x RP-SMA for Wi-Fi antenna |
| Reset | Buttons for restarting/restoring factory settings |
| Physical characteristics | |
| Housing material | Aluminium housing, plastic panels |
| Dimensions | 110 x 50 x 100 mm |
| Weight | 297g |
| Mounting options | DIN rail (can be mounted on two sides), placement on flat surface |
| Work environment | |
| Ambient temperature range during operation | From -40°C to 75°C |
| Ambient humidity during operation | 10% to 90%, non-condensing |
| Protection class | IP30 |
| Certificates | |
| Regulations | CE/RED, UKCA, EAC, UCRF |
| EMI Immunity | |
| Standards | EN 301 489-1 V2.2.3, Draft EN 301 489-17 V3.2.5, EN 301 489-52 V1.2.1, EN 55032:2015 A1:2020, EN 55035:2017 A11:2020 |
| ESD | EN 61000-4-2:2009 |
| Radiation resistance | EN 61000-4-3:2020 |
| EFT | EN 61000-4-4:2012 |
| Surge immunity (AC power port) | EN 61000-4-5:2014 A1:2017 |
| Resistance to conduction | EN 61000-4-6:2014 |
| DIP | EN IEC 61000-4-11:2020 |
| RF | |
| Standards | EN 300 328 V2.2.2, EN 301 893 V2.1.1, EN 301 908-1 V15.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.2.1 |
| Security | |
| Standards | EN IEC 62311:2020, EN 50665:2017 |
RUT901 – Industrial Cellular Router
The RUT901 cellular router delivers the top-rated features of its predecessors, the RUT950 and RUT951, to the market. The device ensures high-performance, providing automatic WAN failover to an available backup connection, guaranteeing network continuity and eliminating downtime.
The router features dual SIM 4G cellular connectivity and Wi-Fi, as well as 4x Ethernet interfaces, to meet the needs of the many varied IoT solutions.
The device guarantees high-performance, providing automatic WAN failover to an available backup connection, guaranteeing network continuity and eliminating downtime.
The RUT901 is dedicated to professional industrial use cases with its high customization possibilities, security features, industrial protocols, and compatibility with Teltonika Networks’ Remote Management System (RMS).
Connectivity
4G LTE (Cat 4), 3G, 2G
Wi-Fi
Wireless Access Point with Hotspot functionality
Dual SIM
With auto-failover, backup WAN and other switching scenarios
Protocols
Multiple protocols supported including MQTT, Modbus TCP, DNP3